Cookie Consent by Free Privacy Policy website

Special application GR01


Download PDF

PIN LOAD CELL


Zoom Click to enlarge image

Special application GR01 Special application GR01 Schema
ATEX Analog Output

Technical Specifications

MaterialStainless steel
Nominal load1 – 100 t
Limit load150 % F.S.
Breaking load300 % F.S.
Supply voltageMaximum 15 V dc
Output1 mV/V
Output tollerance0,1 % F.S.
Zero tollerance1 % F.S.
Linearity0,2 % F.S.
Hysteresis0,2 % F.S.
Reapeatability0,2 % F.S.
Input resistance350-360 ohm
Output resistance350-353 ohm
Insulation resistance>= 2000 MOhm
Creep (30 Minutes)0,2 % F.S.
Thermal compensation-10 / +40°C (14 / +104°F)
Operating temperature-20 / +70°C (-4 / +158°F)
Temperature deviation zero0,003 % F.S. / °C
Temperature deviation full scale0,002 % F.S. / °C
Protection classIP 67
Standard cable length5 m – 4 x 0,25 (shield not connected to the load cell body)
For the complete and latest technical specifications, please refer to the technical data sheet which can be downloaded here:
Download PDF
 
Connections  Special application GR01

MOUNTING OF THE LOAD CELL

General precautions to be followed in the installation and assembly of load cells:

  • Follow the direction of application of force on the load cell
  • Do not exceed the limits of the temperature as indicated in the data sheet
  • Do not remove labels from the load cell
  • Adequately protect the cables with sleeves or channels
  • Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
  • Do not carry out any welding on the mechanical structure after mounting the load cell
  • Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
  • In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
  • Protect load cell from any dust accumulation with any appropriate means